The sgian achlais for George is finally finished, now I simply have to make a sheath for it. It cost me quite some nerves again. I don´t know what it is, everytime I work for Scotsmen, everything imagineable goes awry;-). Wrecked my belt grinder, my air heater and my drilling machine, two sawblades and a file on it, so this is as tribal as they come, for I had no shop also, so I did a lot of work out in the woods, with no vice, a rasp, a knife, a hammer and sanding paper.
I also had some progress on my damascus folder blade. The integral bolsters on the liners give me quite a headache, and I am currently thinking of just doing something in brass. The damascus is 300 layers of 1.2842 steel and 15N20 (C75Ni8) by Matthias Zwissler. Below is an EDC damascus blade for myself, 240 layers (Or was it 480, I lost track) 85mmx3,5-2,0 mm mild steel, file steel and spring steel. I am also thinking of making a virobloc folder from it...
And, being inspired by Petr Florianek, I carved the antler on Eikinnsleikr with a mythic snake that bites its own tail, symbolizing the regenerating forces of nature, life and death and the mythological antagonist of Thor, the snake of Midgard.
I tanned the carving with iron oxide.
Still quite some room for improvement, but as is, I am content with the outcome. And yes, the snake IS upside down, to be seen when you handle the knife. I am growing ever so much fonder of that knife, and will do a sheath to go with it, and am currently thinking what material to take. I think of oak, naturally;-)...
We´ll see... I hope to get into the smithy soon and to forge myself another seax... can´t have too many seaxes...;-)
Those are the adventures of Mr. Fimbulmyrk, in bushcraft and blacksmithing, mountainbiking and hiking, reenactment, writing, singing, dancing, stargazing and having a piece of cake and a coffee. Pray have a seat and look around you, but be warned - the forest´s twilight is ferocious at times.
Donnerstag, 2. Mai 2013
On the bench....;-) er the stump, that is.
Labels:
1.2842,
15N20,
Anglo-Saxon broken-back Seax,
antler,
damascus,
Eikinnsleikr,
file steel,
Knifemaking Tribal Smithing Bushcraft Survival,
making damascus,
mild steel,
Spring Steel,
yew,
Zwissler Damascus
Beliebte Posts
-
At my recent visit to Solingen I also dropped by the Otter knives booth. Now they were very persuasive;-) and I got this beautiful tradit...
-
On request I am doing a personal evaluation of a very classic bushcraft combination. The famed Roselli hunter and carpenter´s knife. I pur...
-
Made a fast herb chopper for the most extremely bestest magical sorcery troll. File steel, selective quench and triple temper.
-
Another bushcraft treasure trove is the humble tinder conk, also known as horse hoof fungus, fomes fomentarius. It is a large polypore grow...
-
I must admit I am a bit proud of this... it has been some time since I last had the opportunity to actually forge more complex things, so...
-
They say it. They urge us and nudge us, everywhere in the Media. They talk about the "hardest winter in the history of mankind". ...
-
Made a simple sheath for the new Trollstein knife trial piece. Just quick and dirty is all, but I already found out something. These are t...
-
So I am in a really fascinating process of recreating the Trollstein knife, a knife that had been found in the glacier melt near Trollstei...
-
The magic troll and myself ordered some slöjd knives. Fact is, when we go out into the woods, a lot of the stuff we do is slöjd. Now there ...
-
After the Solingen Knife expo (see monster post;-), we decided to do some forging again and met at the smithy. Volker was already busy wi...